www.protekdevices.com page 1 description the P0603V24 is an ultra low capacitance esd component designed to protect very high-speed data interfaces. the device has a typical capactance of only 0.05pf (i/o to gnd) and is compatble with the esd immunity requirements of iec61000-4-2. features ? compatble with iec 61000-4-2 (esd): air 15kv, contact 8kv ? low leakage current: 0.10a ? fast response time ? protects one bidirectonal line ? ultra low capacitance: 0.05 pf (typical) ? rohs compliant ? reach compliant mechanical characteristics ? 0603 package ? approximate weight: 0.44 milligrams ? lead-free platng ? solder refow temperature: ? lead-free - sn/ag/cu, 96/3.5/0.5: 260-270c ? 8mm tape and reel per eia standard 481 ? flammability ratng ul 94v-0 applications ? hdmi ? dvi ? display port ? unifed display interface (udi) ? mobile display digital interface (mddi) ? gigabit ethernet ? usb2.0 & usb3.0 ? ieee 1394 interface pin configuration 1 2 only one name means protektion? 05442.r1 3/14 05442 P0603V24 ultra low capacitance esd protection component
www.protekdevices.com page 2 maximum ratings @ 25c unless otherwise specifed parameter symbol value units kvpdu t r storage temperature t stg r odur t l 260 electrical characteristics per line @ 25c unless otherwise specifed part number rated stand-off voltage v wm volts typical trigger voltage (n ote 1) v t volts typical clamping voltage (n ote 1) v c volts maximum leakage current (n ote 2) @v wm i d a typical capacitance @0v, 1mh z c j p f P0603V24 24.0 notes x dppvouvpsopu/rrulsvzpuzx 2. loopupuuouluuuuolpo c z r z esd tester dut (device under test) 450 ohms rg 223/u 50 ohm coax 30x atenuator 4ghz digital oscilloscope 50 ohm iec 61000-4-2 network c z = 150pf r z = 330 ohms figure 1 esd clamping test only one name means protektion? 05442.r1 3/14 05442 P0603V24 typical device characteristics
www.protekdevices.com page 3 i pp 100% 90% 10% tr = 0.7ns to 1ns 30ns 60ns t figure 2 typical esd waveform figure 3 8k v positive clamping waveform 35ns per division 31.5 volts per division 196v trigger voltage 19v v clamp only one name means protektion? 05442.r1 3/14 05442 P0603V24 typical device characteristics
www.protekdevices.com page 4 figure 3 8k v negative clamping waveform 35ns per division 31.5 volts per division -202v trigger voltage -20v v clamp only one name means protektion? 05442.r1 3/14 05442 P0603V24 typical device characteristics
www.protekdevices.com page 5 printed circuit board recommendations parameter value pad size on pcb 0.275mm pad shape rectangular pad defniton non-solder mask defned pads solder mask opening 0.325mm solder stencil thickness 0.150mm solder stencil aperture opening (laser cut, 5% tapered walls) 0.330mm solder paste type no clean pad protectve finish osp (entek cu plus 106a) tolerance - edge to corner ball 50m solder ball side coplanarity 20m maximum dwell time above liquidous (183c) 60 seconds soldering maximum temperature 270c t p rv ramp-up 15 seconds (minimize) solder-time rv ramp-down ramp-down solder melt (maximum temp) duuozg (35-53c above maximum solder melt temp) ramp-up preheat oovdu temperature - c requirements temperature: t p for lead-free (sn/ag/cu): 260-270c t p for tin-lead: 240-245c preheat tme and temperature depends on solder paste and fux actva - ton temperature, component size, weight, surface area and platng. only one name means protektion? 05442.r1 3/14 05442 P0603V24 solder reflow information
www.protekdevices.com page 6 outline dimensions dim millimeters inches min max min max a 1.45 1.75 0.057 0.079 b 0.70 0.95 0.028 0.037 c 0.43 0.63 0.017 0.025 d 0.00 0.05 0.00 0.002 e 0.125 ref 0.005 ref f 0.70 0.80 0.028 0.031 g 1.30 bsc 0.051 bsc h 0.45 0.55 0.018 0.022 notes 1. controlling dimension: millimeters. pad layout dimensions dim millimeters inches nom nom a 1.35 0.053 b 0.95 0.037 c 0.65 0.026 notes 1. controlling dimension: millimeters f a g b c h bottom view top view b a c d side view e only one name means protektion? 05442.r1 3/14 05442 P0603V24 0603 package information
www.protekdevices.com page 7 ordering information base part number leadfree suffix tape suffix qty/reel reel size tube qty P0603V24 n/a -t75 5,000 7 n/a this device is only available in a lead-free confguraton. specifications reel dia. tape width d e f w w p2 p tmax 178mm (7) 8mm 1.10 0.05 1.90 0.10 0.70 0.05 1.55 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 2.00 0.05 0.25 notes 1. dimensions are in millimeters. 2. surface mount product is taped and reeled in accordance with eia-481. 3. sufx - t75 = 7 reel - 5,000 pieces per 8mm tape. 10 pitches cumulatve tolerance on tape 0.2 w f b0 e p2 p0 d p a0 k0 t user directon of feed top cover tape only one name means protektion? 05442.r1 3/14 05442 P0603V24 tape and reel
www.protekdevices.com page 8 contact us corporate headquarters 2929 south fair lane tempe, arizona 85282 usa by telephone general: 602-431-8101 sales: & marketng: 602-414-5109 customer service: 602-414-5114 product technical support: 602-414-5107 by fax general: 602-431-2288 by e-mail: asia sales: asiasales@protekdevices.com europe sales: europesales@protekdevices.com u.s. sales: ussales@protekdevices.com distributor sales: distysales@protekdevices.com customer service: service@protekdevices.com technical support: support@protekdevices.com protek devices (asia pacifc) pte. ltd. 8 ubi road 2, #06-19 zervex singapore - 408538 tel: +65-67488312 fax: +65-67488313 web www.protekdevices.com only one name means protektion? 05442.r1 3/14 05442 P0603V24 company information copyright ? protek devices 2014 - this literature is subject to all applicable copyright laws and is not for resale in any manner. specifications: protek reserves the right to change the electrical and or mechanical characteristcs described herein without notce. design changes: protek reserves the right to discontnue product lines without notce and that the fnal judgement concerning selecton and specifcatons is the buyers and that in furnishing engineering and technical assistance. protek assumes no responsibility with respect to the selecton or specifcatons of such products. protek makes no warranty, representaton or guarantee regarding the suitability of its products for any partcular purpose, nor does protek assume any liability arising out of the applicaton or use of any product or circuit and specifcally disclaims any and all liability without limitaton special, consequental or incidental damages. life support policy: protek devices products are not authorized for use in life support systems without writen consent from the factory. company profile in business more than 20 years, protek devices? is a privately held semiconductor company. the company ofers a product line of overvoltage pro - tecton and overcurrent protecton components. these include transient voltage suppressor array (tvs arrays) avalanche breakdown diode, steering diode tvs array and electronics smd chip fuses. these components deliver circuit protecton in electronic systems from numerous overvoltage and overcurrent events. they include lightning; electrostatc discharge (esd); nuclear electromagnetc pulses (nemp); inductve switching; and electro - magnetc interference (emi) / radio frequency interference (rfi). protek devices also ofers high performance interface and linear products. they include analog switches; multplexers; led drivers; led wafer die for esd protecton; audio control ics; rf and related high frequency products.
|
